Management and Security powered by Landesk

> Configuration > Alerting > Hardware-specific monitoring > Turning off the ModemView service

Turning off the ModemView service

The ModemView service is the service/driver that monitors modem calls (both incoming and outgoing) and generates an alert if it sees one. This service uses about 10 Mb of memory because it uses MFC. You may not want it to be running, especially if you don't have a modem on the device. 

To turn the ModemView service off
  1. On the device (either directly or via remote control) click Start > Control Panel > Administrative Tools > Services.
  2. Double-click LANDESK Message Handler Service.
  3. Under Startup Type, select Manual, and click OK.

You can also click Stop under Service Status.


Was this article useful?    

The topic was:

Inaccurate

Incomplete

Not what I expected

Other